Manufacturer/Origin:
CamilleBauer/Switzerlan
Wiring print with screw terminals
Wiring print with
AMP connections
Wiring print with pads
Wiring print with
trans-zorb-diode |
Shaft transmitter for angular position to be installed
Converts the angular position of a shaft into a load independent direct current signal, proportional to the angular shaft position. The unit is contact free and has minimal mechanical abrasion.
Main features
• Compact transmitter for angular position to be installed into other equipments
• Capacitive scanning system provides absolute position immediately after activation
• No wear, low annual maintenance and mountable anywhere
• Adjustable zero point and measuring span
• Small bearing play influence < 0.1%
• Small starting torque < 0.001 Ncm
• Available with explosion protection "Intrinsic safety" Ex ia IIC T6
• Can be mounted within the hazardous area
Technical data
Measuring range: 0 ... 10°, 0 ... 30°, 0 ... 60°, 0 ... 90°, 0 ... 180°, 0 ... 270°
Measuring output: 0 … 1 mA, 0 ... 5 mA, 0 ... 10 mA, 0 ... 20 mA,
4 ... 20 mA
Each with 3 or 4-wire connection
4 ... 20 mA with 2-wire connection
Power supply: 12 ... 33 V DC (version non-intrinsically safe)
12 ... 30 V DC (version intrinsically safe)
Residual ripple
in output current: < 0.3% p.p.
Residual ripple max.: 10% p.p. (must not fall below 12 V)
Accuracy: Error limit ≤ ±0.5% for ranges 0 ... ≤ 150°
Error limit ≤1.5% for ranges of 0 ... > 150° to 0 ... 270°
Reproducibility: < 0.2%
Response time: < 5 ms
Electrical connection: Soldering terminals (protection class IP 00 acc. to EN 60 529) or
wiring print with screw terminals or
wiring print with AMP connections or
wiring print with pads or
wiring print with trans-zorb-diode
Mechanical data
Starting torque: < 0.001 Ncm with shaft 2 mm
< 0.03 Ncm with shaft 6 mm resp. 1/4"
Clearance influence: ±0.1%
Drive shaft diameter: 2 mm, 6 mm or 1/4"
Admissible static
loading of shaft :
| Sense |
Drive shaft diameter |
| 2 mm |
6 mm resp. 1/4" |
| radial max |
16 N |
83 N |
| axial max |
25 N |
130 N |
Mounting position: Any
Material: Chromated aluminium
Shaft: rust-proof hardened steel
Weight: Approx. 100 g |
