|
Angular Position Transmitter
| KINAX HW730 |
|
| |
Manufacturer/Origin:
CamilleBauer/Switzerlan
|
Programmable hollow-shaft transmitter for angular position for heavy duty applications, dia. 78 mm
Converts the angular position of a shaft into a load independent direct current signal, proportional to
the angular shaft position. The unit is contact free. |
Main features
• Robust transmitter for angular position suitable for field applications
• Highest degree of mechanical and electrical safety
• Proven capacitive scanning system
• No wear, low annual maintenance and mountable anywhere
• Vibration and shock-resistant
• Measuring range, sense of rotation, zero position and linear/V characteristic can be adjusted by a
switch and two push-buttons
• Analog output signal 4…20 mA, 2-wire connection
• Zero position and end position are independently adjustable
• Capacitive scanning system provides absolute position immediately after activation
Technical data
Measuring range: Free programmable between 0 ... 360°
Measuring output: 4 … 20 mA, 2-wire connection
Power supply: 12 ... 30 V DC (protected against wrong polarity)
Output variable IA: Load-independent DC current, proportional to the input angle
Reproducibility: < 0.1°
Accuracy: Error limit ≤ ±0.35° (at reference conditions)
Sense of rotation: Adjustable for sense of rotation clockwise or counterclockwise
Electrical connection: Spring-type terminal block or plug connector M12, 4 poles
Mechanical data
Starting torque: max 0.7 Nm
Clearance influence: ±0.1%
Hollow-shaft diameter: 30 mm, by reduction 10, 12, 16 or 20 mm
Mounting position: Any
Material: Front: aluminium
Back: aluminium anodized
Shaft: rust-proof, hardened steel
Connections: Cable gland metal or plug metal (M12 /4 poles)
Weight: Approx. 820 g |
| |
|
|
