|
Angular Position Transmitter
| KINAX WT707 |
|
| |
|
Shaft transmitter for angular position for heavy duty applications, dia. 100 mm
Converts the angular position of a shaft into a load independent direct current signal,
proportional to the angular shaft position. The unit is contact free and has minimal
mechanical abrasion.
Main features
• Robust transmitter for angular position in singleturn und multiturn suitable for field applications
• Highest degree of mechanical and electrical safety
• Capacitive scanning system provides absolute position immediately after activation
• No wear, low annual maintenance and mountable anywhere
• Zero position and end position are adjustable
• Small bearing play influence < 0.1%
• Available with explosion protection “Intrinsic safety” Ex ia IIC T6
• Can be mounted in hazardous area
• Also available as sea-water resistant version
Technical data
Measuring range: 0 ... 5°, 0 ... 10°, 0 ... 30°, 0 ... 60°, 0 ... 90°, 0 ... 180°, 0 ... 270°
(without gear)
0 ... 10°, 0 ... 30°, 0 ... 60°, 0 ... 90°, 0 ... 180°, 0 ... 270° up to max.
1600 turns (with additional gear)
Measuring output: 0 … 1 mA, 0 ... 5 mA, 0 ... 10 mA, 0 ... 20 mA, 4 … 20 mA
with 3 or 4-wire connection
4 ... 20 mA with 2-wire connection
Output variable IA: Load-independent DC current, proportional to the input angle
Current limitation: IA max. 40 mA
Residual ripple in
output current: <0.3% p.p.
Power supply:
DC voltage only
12 ... 33 V DC (version non-intrinsically safe, without electric isolation)
12 ... 30 V DC (version intrinsically safe, without electric isolation)
Max. current consumption approx. 5 mA + IA
Max. residual ripple 10% p.p. (must not fall below 12 V)
Accuracy: Error limit ≤ 0.5% for ranges 0 ... ≤150°
Error limit ≤1.5% for ranges of up 0 ... >150° to 0 ... 270°
Reproducibility: <0.2%
Response time: <5 ms
Electrical connection: Plug connector or
cable glands, connection print with screw terminals
Mechanical data
Starting torque: Approx. 25 Ncm
Clearance influence: ±0.1%
Drive shaft diameter: 19 mm or 12 mm
Admissible static
loading of shaft: Max. 1000 N (radial)
Max. 500 N (axial)
Mounting position: Any
Material: Housing flange standard: steel
Housing flange sea-water: high-grade steel 1.4462
Housing cover with plug connector: plastic
Housing cover with cable glands: aluminium
Shaft: rust-proof hardened steel
Weight: Approx. 2.9 kg (without additional gear)
Approx. 3.9 kg (with additional gear) |
| |
| |
| KINAX WT707-SSI |
|
| |
Manufacturer/Origin:
CamilleBauer/Switzerlan
Sea-water resistant version
|
Shaft transmitter for angular position for heavy duty applications, > dia. 100 mm
The KINAX WT707-SSI transmitter is a precision instrument.
It serves the acquisition of angular position and rotation,
processing and the provision of measured values as electric output signals for the downstream device.
Main features
• Robust SSI-transmitter for angular position in singleturn and multiturn suitable for field applications
• Highest degree of mechanical and electrical safety
• Absolute position immediately after activation
• No wear, low annual maintenance and mountable anywhere
• Zero setting input
• Also available as sea-water resistant version
Technical data
Measuring range: 360°
Power supply: 10 ... 30 V DC
Power consumption: Typ. 50 mA (at 24 V DC)
Measuring output: SSI, antivalent RS422
Signal coding: Binary or gray-code
Max resolution: Singleturn 12 bit
(1 measuring step = 5'16")
.Multiturn 13 bit (8192 turns)
Accuracy: Error limit ±1°
Repeatability: 0.3°
Max. clock rate: 1 MHz
Zero setting signal: Zero setting: < 0.4 V, min. 2 ms
Idle position: 3.3 V or open
Direction of rotation: Looking at the flange in clockwise rotation,
increasing position values result
Electrical connection: Plug connector M12, 8 poles
Mechanical data
Starting torque: Approx. 25 Ncm
Clearance influence: ±0.1%
Drive shaft diameter: 19 mm or 12 mm
Admissible static
loading of shaft: Max. 1000 N (radial)
Max. 500 N (axial)
Mounting position: Any
Material: Housing flange standard: steel
Housing flange sea-water: high-grade steel 1.4462
Housing cover with plug connector: aluminium
Shaft: rust-proof hardened steel
Weight: Approx. 2.9 kg
|
| |
| |
| KINAX WT707-CANopen |
|
| |
Manufacturer/Origin:
CamilleBauer/Switzerlan
Sea-water resistant version
|
Programmable shaft transmitter for angular position for heavy duty applications, > dia. 100 mm
Converts the angular position of a shaft into a load independent direct current signal, proportional to the angular shaft position. The unit is contact free and has
minimal mechanical abrasion.
Main features
• Robust CANopen-transmitter for angular position in singleturn and multiturn suitable for field
applications
• Highest degree of mechanical and electrical safety
• Absolute position immediately after activation
• No wear, low annual maintenance and mountable anywhere
• Resolution and zero point may be programmable
• Also available as sea-water resistant version
• Magnetic measuring principle
Technical data
Measuring range: 0 ... 360°
Power supply: 10 ... 30 V DC
consumption: Typ. 100 mA (at 24 V DC)
Measuring output: CAN-Bus standard ISO/DIS 11 898
Protocole: CANopen
Profil: CANopen CIA, DS-301 V4.01
DSP-305 V1.0, DS-406 V3.0
CAN-specification: CAN 2.0B
Operating mode: Event-triggered / Time-triggered
Remotely-requested,
Sync (cyclic) / Sync-Code
Signal coding: Natural binary code
Max. resolution: Singleturn 12 bit (1 measuring step = 5'16"),
Multiturn 13 bit (8192 turns)
Accuracy: Error limit ± 1°
Repeatability: 0.3°
Max. Baudrate: 1 MBit/s
Direction of rotation: Parameterisable, rising position values as a standard when viewing the flange side and clockwise rotation of the shaft
Electrical connections: Plug connector M12, 8 poles
Mechanical data
Starting torque: Approx. 25 Ncm
Clearance influence: ±0.1%
Drive shaft diameter: 19 mm or 12 mm
Admissible static
loading of shaft: Max. 1000 N (radial)
Max. 500 N (axial)
Mounting position: Any
Material: Housing flange standard: steel
Housing flange sea-water: high-grade steel 1.4462
Housing cover with cable glands: aluminium
Shaft: rust-proof hardened steel
Weight: Approx. 2,9 kg
|
| |
|
|
